Fishless cycling

[Essjay]

It depends. Saturday to yesterday is 4 days. Could you tell is if you've done any of the following -

Have you added any bottled bacteria? If so, which brand?
Have you put any media from another tank in there?
Are there any live plants in the tank?
Or have you just put brand new substrate, maybe bits of new wood or rocks and added nothing but the ammonia?


Bottled bacteria could have dropped the ammonia level in 4 days.
Media from another tank will have bacteria in it, so that would have dropped the ammonia level.
Plants use ammonia as fertiliser so lots of plants would have dropped the ammonia level in 4 days.
If everything is brand new, there are no plants, no media from another tank and you have not added bottled bacteria, then and only then do you need to add more ammonia.


But don't do anything until we know the answers to the questions!

 

[Tyler777]

Have you added any bottled bacteria? If so, which brand?

The quick start by Api

Have you put any media from another tank in there?

No i havent

Are there any live plants in the tank?
Or have you just put brand new substrate, maybe bits of new wood or rocks and added nothing but the ammonia?

No live plants or media from another tank or new substrate. Everything is brand new.

Besides the amm9nis poured only once same day i added the spi quick start beacteria thats it

 

[Essjay]

The Quick Start may account for it. Many of these bottled bacteria contain the correct ammonia eaters, though I have no idea if this brand is one of them.

I would not add any more ammonia yet as you cannot know the ppm ammonia when it was added.

Follow the method on here.

You should be testing for ammonia and nitrite every third day. You added ammonia last Saturday so the testing schedule is test for ammonia and nitrite on Tuesday (10th), Friday (13th), Monday (16th) and so on until you reach a day where ammonia is less than 0.75 ppm and nitrite is over 2.0 ppm. You need both those levels not just one of them. Do not add any more ammonia until then.
When you get those readings, let us know and we'll talk you though the next step.

 

[Tyler777]

The Quick Start may account for it. Many of these bottled bacteria contain the correct ammonia eaters, though I have no idea if this brand is one of them.

I would not add any more ammonia yet as you cannot know the ppm ammonia when it was added.

Follow the method on here.

You should be testing for ammonia and nitrite every third day. You added ammonia last Saturday so the testing schedule is test for ammonia and nitrite on Tuesday (10th), Friday (13th), Monday (16th) and so on until you reach a day where ammonia is less than 0.75 ppm and nitrite is over 2.0 ppm. You need both those levels not just one of them. Do not add any more ammonia until then.
When you get those readings, let us know and we'll talk you though the next step.

Ok I will test the water parameters tomorrow after work n will post it . Thank you

 

[Tyler777]

The Quick Start may account for it. Many of these bottled bacteria contain the correct ammonia eaters, though I have no idea if this brand is one of them.

I would not add any more ammonia yet as you cannot know the ppm ammonia when it was added.

Follow the method on here.

You should be testing for ammonia and nitrite every third day. You added ammonia last Saturday so the testing schedule is test for ammonia and nitrite on Tuesday (10th), Friday (13th), Monday (16th) and so on until you reach a day where ammonia is less than 0.75 ppm and nitrite is over 2.0 ppm. You need both those levels not just one of them. Do not add any more ammonia until then.
When you get those readings, let us know and we'll talk you though the next step.

Ok here are the water test from the fishless cycl8ng 125 gallons tank.

Nitrate between 5.0 - 10 ppm

Nitrites 0.25 ppm

Ammonia 2.0

Ph 7.6

 

[Essjay]

Nitrite has begun to show up, so test ammonia and nitrite again in 3 days. The latest readings have not reached the targets for adding more ammonia, so it's a waiting game now to reach those targets.

 

[Tyler777]

Nitrite has begun to show up, so test ammonia and nitrite again in 3 days. The latest readings have not reached the targets for adding more ammonia, so it's a waiting game now to reach those targets.

Ok, thank you so much for your help

 

[Tyler777]

Ok, thank you so much for your help

Ok the ammonis test today was 0.50 ppm
And Nitrites was 0.25 ppm

 

[Tyler777]

Nitrite has begun to show up, so test ammonia and nitrite again in 3 days. The latest readings have not reached the targets for adding more ammonia, so it's a waiting game now to reach those targets.

Ok ammonia l3vels were 0.50 ppm n Nitrites were 0.25 ppm today

 

[Essjay]

Nitrite is well below the target for adding the next dose of ammonia. But the ammonia reading was low when you tested a few days after adding it though we didn't know whether that's because you didn't add enough or because the bottled bacteria you added had removed it.

Since both ammonia and nitrite are both low now it suggests the amount of ammonia you added wasn't enough. The bottled bacteria you used doesn't contain the nitrite eaters which grow in fish tanks; it contains nitrite eaters which need a high level of nitrite.
In this case, it seems to me the way to proceed is to add more ammonia. This time, add the ammonia then test for ammonia after 30 minutes (set an alert on your phone to remind you ). If the reading is over 2 but less than 3 ppm, good; make a note of the amount you add. If it's lower than 2 ppm you need to add more. So for example, if the reading is 1 ppm, you need to add twice as much as you just added; or if the reading is just below 2 ppm, add half the amount you just added. But make a note of the total amount you add. If you do need to add more, test for ammonia after another 30 minutes to check the level.

Once you've added enough ammonia, wait for 3 days and test again for both ammonia and nitrite.

 

[Tyler777]

Nitrite is well below the target for adding the next dose of ammonia. But the ammonia reading was low when you tested a few days after adding it though we didn't know whether that's because you didn't add enough or because the bottled bacteria you added had removed it.

Since both ammonia and nitrite are both low now it suggests the amount of ammonia you added wasn't enough. The bottled bacteria you used doesn't contain the nitrite eaters which grow in fish tanks; it contains nitrite eaters which need a high level of nitrite.
In this case, it seems to me the way to proceed is to add more ammonia. This time, add the ammonia then test for ammonia after 30 minutes (set an alert on your phone to remind you ). If the reading is over 2 but less than 3 ppm, good; make a note of the amount you add. If it's lower than 2 ppm you need to add more. So for example, if the reading is 1 ppm, you need to add twice as much as you just added; or if the reading is just below 2 ppm, add half the amount you just added. But make a note of the total amount you add. If you do need to add more, test for ammonia after another 30 minutes to check the level.

Once you've added enough ammonia, wait for 3 days and test again for both ammonia and nitrite.

Ok