Fillet 'O' Fish
Fish Crazy
After setting my tank up about a year ago I have become more and more interested in planted aquaria.
I have been using pressurised Co2 for some time with Seacem Flourish and Fourish Excel ferts. My only draw back has been my inert gravel substrate. I have had good results with the plants, but always wondered how things may improove if I had a proper plant substrate.
After much reading and of course asking many questions on this forum and sending PM to people like George I decided to go for the 'Tropica Plant substrate' and ordered some from Aqua Essentials Web site.
My biggest fear was ending up with a really muddy cloudy tank at the end. But I am pleased to say all went well and I decided to post a step by step journal for the change over to help others considering havng a change over in an already mature tank.
Tank is a Rena 1200mm x 500mm x 750mm high (around 450 litres).
Pic Before change:
Purchased a brand new plastic dustbin to house my fish during the change. Put one of my heaters in the dustbin to maintain water temperature, and a couple of plants for scared fish to hide in. Syphoned some tank water to fill te dustbin (note I did thoroughly clean and soak the dustbin a couple of days prior to use).
Removed the plants to make fish easier to catch ( a lot of mulm stirred up when the plants roots pulled from gravel).
Plants sorted and pruned ready for re-planting. Put into some various tank water filled containers.
Drain all the water away and remove as much as possible (using flat sided ice cream tub to get ight to bottom) If you leave too much water in it will mix with the new substrate and form a muddy slush.
Rather than remove all the gravel from the tank I decided to place the new substrate in 2 halves. Just over half the tanks footprint in gravel was moved to one side.
I placed the new tropica Plant substrate over half the cleared area to the depth as per manufacturers instructions
I then put some fine quartz gravel as a thin layer over the powery substrate (hoping to help prevent it mixing with new water in tank).
I then put the main tank gravel into the prepared half and repeated on the other half and then spread the main gravel all over.
Next some scaping. I decided to put my slate pieces to form a raised plateau which I was going to plant with my amazon swords as a sort of sword forest, with lower plants running diagonally from the corner.
Now the worrying time !! if the substrates mix Im gonna end up with a muddy mess in the tank water. I decided to put a sheet of thick plastic in the tank (weighted with a rock) and carefully bucket water into the tank. It was well worth the effort. The water remained clear !
All the plants and fish put back in and no muddy water
I know the plants need to grow to fill out the tank a little, but I am please a project I was dreading went so well.
hopefully this will encourage some more of you guys thinking of taking the plunge to a plant substrate to go for it!!!
I have been using pressurised Co2 for some time with Seacem Flourish and Fourish Excel ferts. My only draw back has been my inert gravel substrate. I have had good results with the plants, but always wondered how things may improove if I had a proper plant substrate.
After much reading and of course asking many questions on this forum and sending PM to people like George I decided to go for the 'Tropica Plant substrate' and ordered some from Aqua Essentials Web site.
My biggest fear was ending up with a really muddy cloudy tank at the end. But I am pleased to say all went well and I decided to post a step by step journal for the change over to help others considering havng a change over in an already mature tank.
Tank is a Rena 1200mm x 500mm x 750mm high (around 450 litres).
Pic Before change:
Purchased a brand new plastic dustbin to house my fish during the change. Put one of my heaters in the dustbin to maintain water temperature, and a couple of plants for scared fish to hide in. Syphoned some tank water to fill te dustbin (note I did thoroughly clean and soak the dustbin a couple of days prior to use).
Removed the plants to make fish easier to catch ( a lot of mulm stirred up when the plants roots pulled from gravel).
Plants sorted and pruned ready for re-planting. Put into some various tank water filled containers.
Drain all the water away and remove as much as possible (using flat sided ice cream tub to get ight to bottom) If you leave too much water in it will mix with the new substrate and form a muddy slush.
Rather than remove all the gravel from the tank I decided to place the new substrate in 2 halves. Just over half the tanks footprint in gravel was moved to one side.
I placed the new tropica Plant substrate over half the cleared area to the depth as per manufacturers instructions
I then put some fine quartz gravel as a thin layer over the powery substrate (hoping to help prevent it mixing with new water in tank).
I then put the main tank gravel into the prepared half and repeated on the other half and then spread the main gravel all over.
Next some scaping. I decided to put my slate pieces to form a raised plateau which I was going to plant with my amazon swords as a sort of sword forest, with lower plants running diagonally from the corner.
Now the worrying time !! if the substrates mix Im gonna end up with a muddy mess in the tank water. I decided to put a sheet of thick plastic in the tank (weighted with a rock) and carefully bucket water into the tank. It was well worth the effort. The water remained clear !
All the plants and fish put back in and no muddy water
I know the plants need to grow to fill out the tank a little, but I am please a project I was dreading went so well.
hopefully this will encourage some more of you guys thinking of taking the plunge to a plant substrate to go for it!!!