Anti Parasite, Slime & Velvet+ Composition:
- Copper EDTA 6636mg/100ml
- Formaldehyde 1000mg/100ml
- Quinine bisulfate 746mg/100ml
- Benzalkonium chloride 200mg/100ml
(1ml for 5 Litres)
- Does this medication need to be re-dosed every 24h?
- Will several large water changes then carbon in a filter be the best way to remove the medication?
What are you trying to treat?
Copper will kill external protozoan parasites but it also kills invertebrates like snails and shrimp. If you have snails or shrimp in the tank, they need to be removed until treatment is finished and you have done at least 4 massive (80-90%) water changes and gravel cleaned the substrate. You can then add carbon and leave that in the filter for a week before adding invertebrates. Try adding one shrimp or snail and see if they live before adding all of them.
*NB* Never overdose with copper because it can kill fish too.
--------------------
Before adding any medication, work out the volume of water in the tank.
measure length x width x height in cm.
divide by 1000.
= volume in litres.
When you measure the height, measure from the top of the substrate to the top of the water level.
If you have big rocks or driftwood in the tank, remove these before measuring the height of the water level so you get a more accurate water volume.
You can use a permanent marker to draw a line on the tank at the water level and put down how many litres are in the tank at that level.
There is a calculator/ converter in the "FishForum.net Calculator" under "Useful Links" at the bottom of this page that will let you convert litres to gallons if you need it.
--------------------
Before adding any medication, do the following.
Wipe the inside of the glass down with a clean fish sponge. This removes the biofilm on the glass and the biofilm will contain lots of harmful bacteria, fungus, protozoans and various other microscopic life forms.
Do a 75% water change and gravel clean the substrate. The water change and gravel cleaning will reduce the number of disease organisms in the water and provide a cleaner environment for the fish to recover in. It also removes a lot of the gunk and this means any medication can work on treating the fish instead of being wasted killing the pathogens in the gunk.
Make sure any new water is free of chlorine/ chloramine before it is added to the tank.
Clean the filter if it hasn't been done in the last 2 weeks. However, if the filter is less than 6 weeks old, do not clean it. Wash the filter materials/ media in a bucket of tank water and re-use the media. Tip the bucket of dirty water on the garden/ lawn. Cleaning the filter means less gunk and cleaner water with fewer pathogens so any medication (if needed) will work more effectively on the fish.
Remove carbon from the filter (assuming it has any) before treating with chemicals or it will adsorb the medication and stop it working. You do not need to remove the carbon if you use salt.
Increase surface turbulence/ aeration to maximise the dissolved oxygen in the water.