Patience And Budget

I didn't like the one and only rock I had placed in the aquarium. Actually, I liked the rock, it was more that I really couldn't see how to make it work. I took it out of the tank and put it in the rock garden.

I went down to the creek this morning (finally remembered to bring my pruners to rid my path of a branch that was persistently in my way) to work out some new ideas. My eye kept drawing toward rocks that were much too big. I like 55g's, but let's face it, the dimensions aren't always the most accommodating when it comes to aquascaping. I finally found some rocks that I thought might work together. I played around with arrangements on the picnic table, finally made my decisions, and after a good scrub gave them a soak in bleach solution, and set them in a rinse.

Knowing I'd have to remove all the hoods and lights to get the rocks placed, I decided it was time to make some lighting adjustments. I have a little work area up in the loft and that's where I put the shop light I had on my last tank. I took down the shop light, put some clamp-on aluminum reflectors in its place, cleaned off the dust and bird poop, and headed inside. I like this little shop light because it's really low profile, takes two t8's and it only cost $5--at Lowes, regular price. I've never seen them there or anywhere else again. It's going on its fourth year and has worked flawlessly since it was purchased.

At any rate, right now it has a generic 6500 daylight and a Reef Sun 50/50. The tank I bought it for held mbuna (Melanochromis cyaneorhabdos and Labidochromis caeruleus), and two daylight bulbs were just too white and washed out too much color. The bulbs are way past calendar replacement, but they have been used so infrequently, I'm not in a rush to the lighting aisle at home supply.

Plants....
I tried to get pics of plants in the pond, but everything was overexposed. I took what I've had soaking since the other day and zhooshed them around in hydrogen peroxide, and then dropped them in a bucket of the tank water I drained to make room for the new rocks.

I have multiple concerns about the plants.
A) New tank, low nutrients. I only used gravel, no specialized substrate.
B) Not enough light.
C) With one exception, I feel confident that all of them are emergent plants and not strictly submerged.

I've spent some time trying to identify the plants I collected. I feel pretty confident one of them is a sedge. Beyond that, either I have plants otherwise unknown to man, or I have the worst research skills ever. (Going to try and get some pics to the plant section later, but will post what I have right now on here as well.)

For now, the plants are experimental. I'd like some of them to work out because I really like the way they look. Before I forget, the one plant I most positively identified in the lake was hornwort. I really like the structure of hornwort. But I will never put it in my tank unless someone can convince me I won't simply end up with a tank full of "leaves." Cleaning up countless needles off the substrate is not my idea of fun. (Comes in a close second to killing ants one by one.) Irks me to no end that now it floats in my lake for free and I used to pay to have it ruin my tank when I was a kid.
 
Here is a horrible pic of the tank as it is now. Between the new lights and the new rocks, I am having a real doozy of a time getting a decent pic of the tank. Is there a sticky thread on here somewhere about how to take decent pics? I keep getting this ugly combination of underexposure and overexposure. Sux, cause I want to be able to give you some idea of how nice it looks (IMHO) without a camera blasting it apart.


 
If you look in the upper right hand corner, you can see two bright spots. That's where the HOB adjusts against the back glass. It presses the fabric against the glass and creates an angle in the background. I'm learning to live with it. But if it would make you crazy, I'd suggest hanging it from the glass instead of the rim, or using another idea.
 
Here's a pic of one of the plants I can't identify. I really like the look of them.


 
 
Liking the tank so far, Pete!
Your pictures are far better than anything I've produced to date.
Have no idea what the plant is but it does look pretty! It reminds me a bit of thyme but I doubt that's what it is as it's a terrestrial plant.
 
The experimental plants I put in did not do well. In fact, they are moribund. I'll have to take another approach. The hornwort I left in the bucket of rinse water is going strong and has yet to drop a needle. I'm really worried it will fall apart the second it hits my tank, but I'm starting to ponder the positive possibilities as well. I may put it in and dare the fates. For now, it's the only plant I pulled from the lake that isn't dying.
 
The driftwood is now growing some lovely gunk. It's definitely in its ugly duckling stage. 
 
Caution...
Fish tank joy giggles ahead.
yahoo.gif

 
I mentioned before that the HOB that came with the tank was acceptably noisy, but that I missed my Filstar xp3 (now called the xp-L). Well, I was, of course, still scouring online sale postings. I found an ad selling a tank, stand, hood and Rena canister filter for a delightfully low price. I emailed and told them I was sure they would sell the package without a problem, but if they decided to sell the filter separately for whatever reason, to please keep me in mind. I heard back a couple days later....
 
"I have an extra 3 basket that's hardly been used. $35."
 
A few inquiries/days later and I pulled into his driveway. Everything looked good to me. Filstar xp3 (L) and pretty as a new penny with a quick rinse. Turns out he is selling just about everything he owns and moving to the coast to live on a house boat. We set it up in his front yard (intake hose in a kiddie pool) so I could hear it run. Bliss. It was a back up filter (long story) that had been used all of like 3 times for a couple weeks. I didn't even haggle on price--very unlike me, but I knew what I wanted and I knew I'd have to sacrifice fish to the nitrogen cycle gods to get it any cheaper.
 
I stopped at the hardware store to grab some new tubing and a couple clamps. (I'd checked online to see what size I would need. I was really hoping for this filter.)
 
Taking hoses off the filter fittings can appear daunting. The last thing you want to do is break the filter trying to get an old hose off. I took my x-acto knife and slowly cut through the tubing until I could pull it apart with my fingers. Go slow so you don't jack up the "ribs" on the fittings and it will come off clean.
 
Cleaned it all up--I used a bleach solution, rinses and sun dry, and put that sucker on the tank. I've been grinning ear to ear about it every time I walk into the room. Quiet. Just the barely noticeable hum I knew and loved so well.
 
I spent $10 on new tubing and $1.80 on clamps in case of need. I didn't need the clamps--that tubing goes on tight. (I'll return them next time I'm in--I spend way too much time in hardware stores.)
 
However, I am still watching one spot on a manufactured tube that appears to be leaking very, very, very slowly. IME, they tend to stop on their own given a bit of time. But if not, I'll shut it down, work the standard magic with GE silicone, and start grinning all over again.
 
$35, plus $10 new tubing....
and I'm grinning like a 12 y.o. who just found out the person he likes, likes him too.
 
Ha, fish tanks are so much fun.
yay.gif
 
:lol: Yay! Glad you were able to get it and enjoying the quiet.
 
yinyangpete said:
I knew what I wanted and I knew I'd have to sacrifice fish to the nitrogen cycle gods to get it any cheaper.
 
:D
 
Looking good!  Shame the plants didn't work out.  Maybe they will produce new growth after melting but I can't say I recognise them either.
 
Plant update:

I went to pull out the dying plants and found nice, fresh, white roots growing. So I left them where they were. I think I've been feeling nervous about this whole collecting my own plants process because I lost sight of the fact that they are essentially weeds. One of my talents is spinning myself into a state of analysis paralysis. So big breath, relax, let them be plants. As far as new plants, I collected two types that grow completely submerged. They look like sago pondweed or widgeon grass. (The camera went on vacation with someone else, so still no pics, but will try to get something up next week.)

Filter update:

I ended up needing to fix the piece with the leak. Simple fix with some silicone. I went to take the piece off the filter and because I was most decidedly not "in the moment" I neglected to break the siphon properly. Ended up with a big splash of water down the back of the tank and on the floor. Silly mistake.

The tubing I bought was collapsing/kinking near the filter on both sides. I strategically placed two 3M hooks to rest the tubing on and redistribute the direction and weight of the hoses. No more collapsed hose.

Fish update:

I've re-established my relationship with the owner of the LFS. It's an old-school store, if you will. Fish names and prices written on 3x5 index cards. If you see a big clump of java moss with a few small java ferns growing in it, you have to ask how much and she'll give you a price. You go in planning to spend 5 minutes and then realize you've spent 30. Anyway, she's wonderfully receptive to special orders. I'll be getting my red cherry shrimp from her.

As far as the actual fish themselves, I've reached out to a local breeder of show guppies. He's agreed to sell me culls from his show stock at a price that fits my budget. After having mixed community tanks, a discus tank and an mbuna tank, I've decided to return to the fish that got me started in the hobby. I still remember going to my great aunt's house as a small child and marvelling at her endless small tanks filled with guppies. Their shape, color and movement still please me. And, since I am on hard well water, they should do fine without constant fiddling with water parameters.
 
I hope the plants work out! Glad you were able to fix the filter. Can't wait to see your guppies!
 
I suffer from analysis paralysis myself! :)
 
Hopefully your plants are just adjusting to the new conditions.  I don't really know what to expect when it comes to wild-collected specimens so it will be interesting to see what happens.  Also looking forward to pics of guppies!
 
Hope your camera comes back from holiday soon!
 
Camera is back from vacation. Figured I'd get some new pictures up.

I've fiddled around with a few small projects. The sum total makes it feel more like a working tank than a zoo display, which I quite enjoy. I appreciate a runway model tank as much as the next person, but there's something about a tank that keeps calling out to be touched that I really like. It's like walking into a room where you're afraid to sit on the furniture versus walking into one that practically forces you to sit back and put up your feet. But I digress.

Hornwort. I can collect it from the lake, put it in a bucket of well water, and it will sit for days on end without dropping a single needle. A day after going into the tank, and it's nearly completely bald. I keep reading that many people have found success with it after its given time to acclimate to the tank. And how do you do that without getting a tank full of hornwort leaves? You put it in a basket. It's not an original idea--I read it on a forum somewhere. So, I took the extra filter basket I had and wrapped it in a piece of window screen secured with a big rubberband. It floats on its own, contains the dropped leaves, and hopefully will result in some usable hornwort. Something to play with anyway.



I find it difficult to work with the tank when access is limited to the hood openings. Take off the hoods and presto, you have a tank without enough light to see what you're doing. I went to the barn and grabbed a 2x4, cut two pieces 13.5" long, set them on the ends and put the shop light on them. The glass in the hoods (and the hoods themselves) were reducing the amount of light getting into the tank so I decided to just leave the light on the 2x4's. Simple. But the light that hits you in the face as you look toward the tank makes you feel like you're being interrogated in a 1950's crime drama. Off to the barn again, and I eyeballed two pieces of 1x2 I thought might work. In to the house for a quick fit, back out to the barn, grabbed the drill and put in 3 screws, and I had a makeshift shade without even touching the saw. It's not a perfect fit, but it's so plenty close enough for me, that I figure it was meant to be. My favorite part is that all I have to do is pick it up to remove it and I can reach into the tank without barrier. (I'm foreseeing a late Fall woodworking project.)







Finally made it to the dollar store to pick up nylon pot scrubbies for the filter. Also picked up a pack of scouring pads for the tank. Decided to try them as guppy & shrimp protectors and as a bit of prefilter. Put them on the intakes with rubberbands. So far so good. It's also a heck of a visual reminder about what normally gets sucked into your filter and sits there and rots until it gets cleaned. Took this pic of the pads before I cleaned them, by the way.
wink.png




I spent some more time out in the boat collecting plants. Discovered some short grassy type plant I haven't identified yet--see pics. Also collected what I believe is wideleaf sagittaria. Put a lot of both in the tank.







Peace to everyone till next time....
 
So glad you've got your camera back, Pete! Your tanks and plants are looking good.
Apologies if you've already mentioned this, but are you staying low tech or are you planning adding ferts and CO2 etc?
 
That's a really neat thing with the hornwort! I hated all the needles it left on the floor of the tank (and it made my hands itch), maybe I'll give it another try one day using that method.
 
Great fix! I had the same problem on a little 5g we had. Fixed it by upgrading to a 10g (the 5 had a incandescent hood) :lol:
 
Can't wait to see more pics :) The plants look nice, though not sure what they are.
 

Most reactions

Back
Top