Is This Co2 Regulator Okay? Fe System

[phishyphil]

Hi there

Going to take the plunge and fit Pressurised CO2 to my tank! Need some help though people. Firstly CO2 Regulator. is this one okay and will it fit a Fire Extinguisher? Fire Extinguisher from Ebay

Will this diffuser work ? Diffuser from ebay

Thanks again

 

[SO19Firearms]

Hi there

Going to take the plunge and fit Pressurised CO2 to my tank! Need some help though people. Firstly CO2 Regulator. is this one okay and will it fit a Fire Extinguisher? Fire Extinguisher from Ebay

Yes, but if it's like the picture you'll need an extra fitting on the tank side to attach your pipe work.

Will this diffuser work ? Diffuser from ebay

If you've got a nano

Thanks again

IMO

 

[phishyphil]

Nope don't have a nano, don't know how I didn't miss that one

What Fitting would i need on the FE Mate, if you can help

 

[SO19Firearms]

Not totally sure m9. Some kind of barbed nipple unless you're attaching a solenoid. It'll be something standard though, so you might be better getting it forst and looking at what you're dealing with.....

IMO

 

[phishyphil]

You mean something to attach the CO2 pipework too?

 

[SO19Firearms]

You mean something to attach the CO2 pipework too?

Yes m8

 

[phishyphil]

Cheers Pal

 

[paul_fox]

I dont have any connection with this site below, but I run a fire extinguisher with a reg and whats called a nut and tail to reduce the pipe size to fit aquarium piping, but you do need a needle valve to control the co2 finely, I use a Clippard one as advised by Tom Barr

http/www.welduk.com/Details.asp?ProductID=82
http/www.welduk.com/Details.asp?ProductID=291

If in doubt, give that site a call, when I was setting up a few years ago, they were really helpful

 

[phishyphil]

I dont have any connection with this site below, but I run a fire extinguisher with a reg and whats called a nut and tail to reduce the pipe size to fit aquarium piping, but you do need a needle valve to control the co2 finely, I use a Clippard one as advised by Tom Barr

http/www.welduk.com/Details.asp?ProductID=82
http/www.welduk.com/Details.asp?ProductID=291

If in doubt, give that site a call, when I was setting up a few years ago, they were really helpful

ahh thanks for this one mate, will look into this system