TwoTankAmin
Fish Connoisseur
Yesterday I pulled apart the L236 tank, well the left half anyway, to remove fry. When done I had three hang on the front water circulating traps with different sized fry. Due to the setup I had to put the smallest fry into a dip-and-pour initially. Once I got the tank put back together, I had 28 fry, 12 of them the smallest size. I set up the 3rd and final trap at that point and in went the fry.
Because I had some issues with the air system powering the water flow, when I woke up at about 5:30 this morning I decided to do a check and make sure all was well. The 5 big ones were fine, the 11 inch+ fry were all fine but, when I got to the 3rd trap, there wasn't a single fry in it. Turns out I had forgotten to insert the barrier in the overflow that insures nothing can swim out. So all 12 fry are back where they started.
DOH!
Because I had some issues with the air system powering the water flow, when I woke up at about 5:30 this morning I decided to do a check and make sure all was well. The 5 big ones were fine, the 11 inch+ fry were all fine but, when I got to the 3rd trap, there wasn't a single fry in it. Turns out I had forgotten to insert the barrier in the overflow that insures nothing can swim out. So all 12 fry are back where they started.
DOH!