Any Tetra Ex1200 Owners On Here ?

[LastBoy5cout]

Am looking to get a inline diffuser and need the internal diameter of the EX1200 tubing.

I have one of these beasties but its got water pumping through it and to take it apart just to measure the tubing is a bit long winded ( and Im lazy ) so if anyone has one in pieces or knows the internal diameter and couild post it here that would be great and muchly appreciatted.

I have looked on the Tetra website and it list's it as 15.2 mm which is an odd size so just wanted it checked it please

Thanks in advance.

 

[DevUK]

It's standard 16mm/22mm (int/ext)

Any hose of those dimensions will fit fine. Just to be sure, I've measured an off cut and it measures approx 15mm internal. Of course, it stretches a little to go over a larger connector (hence the 16mm I guess).

 

[LastBoy5cout]

Okay, Im hoping it will stretch over one of these!

http/www.aquaessentials.co.uk/index.php?...roducts_id=2143

Im guessing if I get the tubing hot and be patient and not force it, it should fit!

 

[Scotty001]

Okay, Im hoping it will stretch over one of these!

[URL="http/www.aquaessentials.co.uk/index.php?...roducts_id=2143"]http/www.aquaessentials.co.uk/index.php?...roducts_id=2143[/URL]

Im guessing if I get the tubing hot and be patient and not force it, it should fit!

if you boil up some water in a kettle / pan and place the tubing into the hot water for 30 seconds to a min at max this will make the tubing soft enough to be manipulated over a larger bit of pipe / tubing. and when it cools Will create a tight seal (may be v difficult to remove it again) Ive done this several times far many applications.