Which Filter With 3/4 Outlet Piping?

[Wigster]

So I bought a APS 2000EF filter a few weeks ago, and although at the time I wasn't too happy with it, I've now grown to like.
Still the only downside is the shoddy spraybar/outlet fitting.

So I was just wondering if anyone knew/can measure their outlet pipe size of reputable brands such as Eheim/tetratec etc, then my plan is simply just buy the spare part from them directly.
(I want to replace all the outlet section)

My main outlet pipe is 3/4" or about 19mm, so if anyone knows a spraybar attachment + the U bend to go over the back of the tank to fit that I would be grateful .

 

[OldMan47]

Why not go to your local home improvement center and buy PVC piping to fit? Once you route the return into the tank, just cap a straight piece of pipe and drill holes along its length to make a "custom" spray bar. With 1/8 inch holes every 1/2 inch or so you can use a foot long or maybe a bit longer piece as a spray bar.
Sorry about the units, I am in the US. Drill 2 mm holes every cm or so along a length of PVC about 30 to 45 CM long for that custom spray bar.

 

[Wigster]

Already had that plan, just wanted to see if there was one already made specifically for the job I could just order as a spare, PVC is surprisingly expensive in my local home depot that's all.

 

[Wigster]

Upon reading some reviews I've seen someone bought the Eheim installation kit 1 + 2, and some eheim 16/22mm pipe, so although it's 3mm smaller, hopefully I can just squeeze it over my existing outlet on the cannister filter .