Has any one got this thing to work in chamber 3 as I have it in my tank I can not get the bubbles to raise up the chamber it is also very loud any help please?
My lfs has it in this chamber in there display d&d and they have got it working perfectly {only prob is I am not back at shop for a week or so and i could really do with some help now if possible}
[/img]
It duz not seem to make any difference to the micro bubbles if I turn the gray knob and the thing is making loud gurgling sound
Just a quick update got the thing working now its still a little loud but I have been told it will quieting down when it has settled in
How did I get it working for those of you that are interested?
I put my skimmer in chamber 3 {this leves me the option to convert my 2nd chamber in to a refuge } I put it in back to front if you no what I mean so as you can get at the grey knob it fits quit nicely and there is room for the heater in there as well
I had to keep the water level REALLY low in the filter chambers, To get the water level down I held the surface water skimmer in place in the tank then held a piece of flat plastic over the inside of hole in the filter wall so no or very little water could get through. The pump pumps the water out of the filter chambers and back into the main display tank when the water was just above the divider(5mm) between chambers 2 & 3 I removed the plastic from over the hole and allowed the water to flow. The water level remained as I had set it. I made 1 small mod to the skimmer I added a piece of air line about 1 To 2 inch long to the air in take once the skimmer stopped putting micro bubbles in main tank I fine tuned it with the gray knob and that’s it working
any help please?
{only prob is I am not back at shop for a week or so and i could really do with some help now if possible}
