New Oranda missing scales

[Joseey]

Hello!!
I have a new tank with a juvenile Oranda and a Ryukin.
I've had the fish for about 3 weeks, and the tank has been running for about 6 weeks and everything has been perfect until a couple of days ago.
I noticed the Oranda looked to be missing scales but they almost look like they're just changing into shiny scales?
I have the tank set at 21.5 degrees because I have plans to introduce a pleco or cat fish eventually and I've been told that they can change colour in heated tanks?
I also had the nitrites in my tank spike around the same time but have since gone after a couple of partial water changes, the nitrate is sitting between 20-40.
It's a 28L tank with only the 2 goldfish in it.
Both fish get along really well and are both very happy, swimming around with big appetites so I'm just a bit confused what could be wrong.

Hope someone can help, thank you!!!

 

[Colin_T]

Hi and welcome to the forum

It looks like excess mucous covering a wound or irritated area on the fish.

--------------------
What to do now?
Test the water for ammonia, nitrite, nitrate and pH. Post the results (in numbers) here.

Wipe the inside of the glass down with a clean fish sponge. This removes the biofilm on the glass and the biofilm will contain lots of harmful bacteria, fungus, protozoans and various other microscopic life forms.

Do a 75% water change and gravel clean the substrate every day for a week. The water changes and gravel cleaning will reduce the number of disease organisms in the water and provide a cleaner environment for the fish to recover in.
Make sure any new water is free of chlorine/ chloramine before it is added to the tank.

Clean the filter if it hasn't been done in the last 2 weeks. However, if the filter is less than 6 weeks old, do not clean it. Wash the filter materials/ media in a bucket of tank water and re-use them. Tip the bucket of dirty water on the garden/ lawn. Cleaning the filter means less gunk and cleaner water with fewer pathogens.

Increase surface turbulence/ aeration to maximise the dissolved oxygen in the water.

If there's no improvement after a couple of water changes, add some salt. See directions below.


--------------------
SALT
You can add rock salt (often sold as aquarium salt) or swimming pool salt to the aquarium at the dose rate of 1 heaped tablespoon per 20 litres of water. If there is no improvement after 48 hours you can double that dose rate so there is 2 heaped tablespoons of salt per 20 litres.

Keep the salt level like this for at least 2 weeks but no longer than 4 weeks otherwise kidney damage can occur. Kidney damage is more likely to occur in fish from soft water (tetras, Corydoras, angelfish, Bettas & gouramis, loaches) that are exposed to high levels of salt for an extended period of time, and is not an issue with livebearers, rainbowfish or other salt tolerant species.

The salt will not affect the beneficial filter bacteria, fish, plants, shrimp or snails.

After you use salt and the fish have recovered, you do a 10% water change each day for a week using only fresh water that has been dechlorinated. Then do a 20% water change each day for a week. Then you can do bigger water changes after that. This dilutes the salt out of the tank slowly so it doesn't harm the fish.

If you do water changes while using salt, you need to treat the new water with salt before adding it to the tank. This will keep the salt level stable in the tank and minimise stress on the fish.

When you first add salt, add the salt to a small bucket of tank water and dissolve the salt. Then slowly pour the salt water into the tank near the filter outlet. Add the salt over a couple of minutes.

 

[Joseey]

Hi and welcome to the forum

It looks like excess mucous covering a wound or irritated area on the fish.

--------------------
What to do now?
Test the water for ammonia, nitrite, nitrate and pH. Post the results (in numbers) here.

Wipe the inside of the glass down with a clean fish sponge. This removes the biofilm on the glass and the biofilm will contain lots of harmful bacteria, fungus, protozoans and various other microscopic life forms.

Do a 75% water change and gravel clean the substrate every day for a week. The water changes and gravel cleaning will reduce the number of disease organisms in the water and provide a cleaner environment for the fish to recover in.
Make sure any new water is free of chlorine/ chloramine before it is added to the tank.

Clean the filter if it hasn't been done in the last 2 weeks. However, if the filter is less than 6 weeks old, do not clean it. Wash the filter materials/ media in a bucket of tank water and re-use them. Tip the bucket of dirty water on the garden/ lawn. Cleaning the filter means less gunk and cleaner water with fewer pathogens.

Increase surface turbulence/ aeration to maximise the dissolved oxygen in the water.

If there's no improvement after a couple of water changes, add some salt. See directions below.


--------------------
SALT
You can add rock salt (often sold as aquarium salt) or swimming pool salt to the aquarium at the dose rate of 1 heaped tablespoon per 20 litres of water. If there is no improvement after 48 hours you can double that dose rate so there is 2 heaped tablespoons of salt per 20 litres.

Keep the salt level like this for at least 2 weeks but no longer than 4 weeks otherwise kidney damage can occur. Kidney damage is more likely to occur in fish from soft water (tetras, Corydoras, angelfish, Bettas & gouramis, loaches) that are exposed to high levels of salt for an extended period of time, and is not an issue with livebearers, rainbowfish or other salt tolerant species.

The salt will not affect the beneficial filter bacteria, fish, plants, shrimp or snails.

After you use salt and the fish have recovered, you do a 10% water change each day for a week using only fresh water that has been dechlorinated. Then do a 20% water change each day for a week. Then you can do bigger water changes after that. This dilutes the salt out of the tank slowly so it doesn't harm the fish.

If you do water changes while using salt, you need to treat the new water with salt before adding it to the tank. This will keep the salt level stable in the tank and minimise stress on the fish.

When you first add salt, add the salt to a small bucket of tank water and dissolve the salt. Then slowly pour the salt water into the tank near the filter outlet. Add the salt over a couple of minutes.

Thank you so much for your response, that is so so helpful